Integrated Battery Monitor and Inverter/Charger Control in a Single Panel

The Link 1000 is an instrumentation and control panel designed for use with the Xantrex Freedom series inverter/charger and a single battery bank. It reads like a fuel gauge for batteries - displaying battery state-of-charge at a glance. Inverter and charger functions are independently controlled with the touch of a keypad.

Product Features

Digital numeric display automatically compensates for ambient conditions and selectively shows: DC volts and amps, battery amp hours consumed, time remaining to full discharge, fault conditions
Multi-colored LED displays: approximate battery state of charge, AC input
Push button control of power sharing, equalizing, battery set-up, independent inverter and charger on/off controls
Second sense lead for voltage sensing on an additional battery bank
Power Share and Idle Mode are easily set from the panel
Compatible with 12 or 24 volt sytems
Includes precision DC shunt
Easy to install
One year warranty
Programmable Advanced Functions

User programmable adjustments of the Freedom Inverter/Charger directly from the front panel
Can be set for four different battery types including wet, gel and AGM
Data is used to recall key information about the battery bank: charge efficiency, deepest discharge, average discharge, and other data

 Specifications


Voltage Measurement
(standard model auto range) 0-19.90 VDC (0.05 V resolution) 0.0-50.0 VDC (0.1 V resolution)
Amperage Measurement
(+/- 500 amps) Low range 0-40 A +/- 0.1 A resolution High range 40-500 A +/- 1.0 A resolution
Amp-hour Measurement Low range +/- 0-199.9 Ah (0.1 hour resolution) High range +/- 200-1, 999 Ah (1 hour resolution)
Time Remaining Measurement Low range 0-199.9 hours (0.1 hour resolution) High range 0-255 hours (1 hour resolution)
Power Requirements 8-40 VDC (DC power supply voltage)
Power Consumption 50-170 mA (display auto dims with ambient light) 25 mA (bar graph display @ 12 V)
Shunt Type 500 A/50 mV (included)
Accuracy Voltage +/- 0.6% of reading + 1 least count of resolution Amperage +/- 0.8% of reading + 1 least count of resolution Amp- hours Ah Error - time measurement x current error
General Specifications
Dimensions (H x W x D) 3.0 x 4.75 x 1.1" (75.55 x 120 x 27.3 mm)
Weight (not including shunt) 4.6 0z (130.4 g)
Warranty 1 year