|
Product Information: Reliable Mobile Power from Magnum EnergyThe ME Series Inverter/Charger from Magnum Energy is a new generation inverter designed specifically for rugged mobile applications. The ME Series is powerful, easy-to-use, and best of all, cost effective.
Safe and reliable: The ME Series is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01, ensuring that the inverter is safe and reliable. Easy-to-install: Install the ME Series in four easy steps: simply connect the inverter's output to your distribution circuits or electrical panel, connect your shore power cable (AC) to the inverter's
easy-to-reach terminal block, connect the batteries, and switch on the power. Features The ME Series Inverter/Charger is loaded with features: Power Factor Corrected (PFC) Charger: The charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger - using only 15 amps per 100 amps versus 23 amps used by standard chargers. Choices: The ME Series comes in three power models, allowing you to choose the model that is right for you. Versatile mounting: Mount the ME Series on a shelf, bulkhead, or even upside down. Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance. Multiple ports: The ME Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port. Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be. Convenient switches: The ME Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator. Expanded transfer relay: 60 Amp transfer service is available on all models. Buy with ease: The ME Series is backed by a three-year (36-month) limited warranty. Accessories and Options* Remote control: For convenient finger-tip operation, including the new one-knob? programming. AGS module: Automatically starts and stops your generator based on temperature or battery voltage. | Inverter Specification | ME2012 | ME2512 | ME3112 | | Input battery voltage range | 9 - 16 VDC | 9 - 16 VDC | 9 - 16 VDC | | Nominal AC output voltage | 120 VAC | 120 VAC | 120 VAC | | Output frequency and accuracy | 60 hz ± 0.1Hz | 60 hz ± 0.1Hz | 60 hz ± 0.1Hz | | 1 msec surge current (amps AC) | 60 | 100 | 120 | | 100 msec surge current (amps AC) | 37 | 45 | 50 | | 5 sec surge power (real watts) | 3700 | 5000 | 6000 | | 30 sec surge power (real watts) | 3450 | 4500 | 4800 | | 5 minute surge power (real watts) | 3100 | 3500 | 3950 | | 30 minute surge power (real watts) | 2400 | 2900 | 3500 | | Continuous power at 45° C | 2000 VA | 2500 VA | 3100 VA | | Maximum continuous input current | 266 ADC | 333 ADC | 413 ADC | | Inverter efficiency (peak) | 95% | 91% | 90% | | Transfer time | 16 msecs | 16 msecs | 16 msecs | | Search mode ( Typical) | 5 watts | 5 watts | 5 watts | | No load ( 120 VAC output ) Typical | 20 watts | 23 watts | 25 watts | | Wave Form | Modified Sine Wave | | Charger Specifications | | Continuous output at 45° C | 100 ADC | 120 ADC | 160 ADC | | Charger efficiency | 85% | 85% | 85% | | Power factor | > .95 | > .95 | > .95 | | Input current at rated output (AC amps) | 15 | 18 | 21 | | General Features and Capabilities | | Transfer relay capability | 2 legs at 30 A for 120 V/30 A or 240 V/60 A service | | Five stage charging capability | Bulk, Absorb, Float, Equalize, and Battery Saver™ | | Battery temperature Compensation | Yes, 15 foot battery temp sensor standard | | Internal cooling | 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans | | Overcorrect protection | Yes, with two overlapping circuits | | Conformal coating on PCB's for corrosion protection | Yes | | Over temperature protection | Yes, On Transformer, MOSFETS, and battery | | Stainless steel fasteners for corrosion protection | Yes | | Dual AC branch rated output breakers | On the ME2012-20B only - AC breakers in 20 amp ratings | | Listings | ETL Listed to UL/cUL 458, CSA C22.2 #107.1-01 | | Warranty | 3 Years | | Environmental Specifications | | Operating temperature | -20° C to +60° C (-4° F to 140° F) | | Nonoperating temperature | -40° C to +70° C (-40° F to 158° F) | | Operating humidity | 0 to 95% RH non condensing | | Physical Specifications | | Dimensions (h x w x d) | 13.75" x 12.65" x 8.0" (34.9 cm x 32.1 cm x 20.3 cm) | | Mounting | Shelf (top or bottom up) or bulkhead (vents up) | | Max operating altitude | 15,000 feet | | Weight | 37 lb | 41 lb | 46 lb |
| 
